• Зарегестрируйтесь что бы увидеть контакты услуг и продавцов ПАВ

    You need to register to see contacts RC sellers and services.

Vape liquid containing THC with THC Vape liquid


Well-known member
Reputation +/-
Reaction score
Cannabis is available in many ways, but one of the most secretive is to use a vape. THC e-liquid is an ordinary concentrate of cannabis, obtained by extraction with CO2 or alcohol. It is a regular cannabis concentrate that is obtained by extraction with CO2 or alcohol. The end product is very potent, up to 80-90% THC (regular hemp strains contain around 12-35% THC), and can be used just like regular vape liquid.

We will need:

  • 7 grams of buds or 3 grams of kief (you can use less or more if you like)
  • Solvents: propylene glycol and glycerin (PG and VG). Sold in vape shops. You can mix them yourself, or you can take a ready-made base. A base with a ratio of 60PG / 40VG is best
  • The leader among solvents is food solvent PEG-300 (polyethylene glycol). It is not difficult to find it, if possible, use PEG.
  • Large syringe or measuring spoons (to measure the right amount of solvents)
  • Kitchen utensils - oven, stove, 2 glass jars, baking sheet, foil or baking paper, saucepan, small glass bottle 30-50 ml with a lid
  • Cartridges for your vape
  • Step 1: Decarboxylate Buds/Kif
This is a mandatory step because the vaping temperature is not high enough to decarboxylate the THC-K that raw cannabis is rich in.

  1. Grind the bumps
  2. Line a baking sheet with foil or baking paper
  3. Spread the cones or kief in an even layer on a foil/paper-lined baking sheet.
  4. Preheat oven to 120 degrees
  5. Place the tray in the oven for 20 minutes
Step 2. Preparing the base

If you bought propylene glycol and glycerin separately, then you need to prepare the base for the liquid from them. To do this, pour 18 ml of propylene glycol and 12 ml of glycerin into a jar, mix. If you took a ready-made base, then pour 30 ml into a jar.

Note: Some recipes recommend using pure propylene glycol, but this is undesirable for a number of reasons. Firstly, PGs are not thick enough for a vape to work properly. Secondly, the mixture will easily separate into PG and alcohol, so you have to shake it all the time. Thirdly, the puff will be hard and tasteless. This is why we recommend adding glycerin to propylene glycol, as is done in commercial e-liquids. The PG/VG ratio can be 60/40 (as in our recipe), 70/30, or even 80/20. Feel free to experiment and decide what you and your vape like best.

Step 3

Pour the decarboxylated buds/kief into the base jar.

Step 4

Put a pot of water on the stove, bring the water to a boil.

Step 5

We take a second glass jar, apply a coffee filter or gauze folded in 4 layers to the hole, and filter our mixture. Press the filter carefully.

Step 6

Using a syringe, pour our liquid into any glass vial, close it and put it in the refrigerator for 2-3 days.

Step 7

We take out the vial from the refrigerator, fill the vape cartridge with liquid with a syringe, and taste it.
Last edited:
Top Bottom